This site uses cookies. By continuing to browse this site you are agreeing to our use of cookies. Find out more here.
x

Samsung TV Replacement Remote

URC 1910

Important: this is a European model. Please click here for the American model.

Where to buy?

Replacement remote for all Samsung TVs

Guaranteed to work 100% of all Samsung TV models. There is no setup required for most Samsung televisions – simply insert the batteries and start using it. Full learning feature – add any function from any other remote control. Keys include all common Samsung functions like: Menu, Guide, HDMI and Smart Hub. This is the only true Samsung Replacement remote.

Additional Information

Product code URC 1910
Replacement remotes
Batteries 2 x AAA (not incl.)
Internet Upgradable No
No. of devices 1
TV/LCD/LED/Plasma

FAQs & Solutions

  • Why doesn’t the learning work on my Samsung Replacement Remote? There are a number of reasons why learning might be unsuccessful:
    1. Make sure the original remote that came with the device is in working order, by testing it on your device. If it is not responding, it might not be working correctly.
    2. Make sure you are not performing the learning procedure under bright lighting or in bright sunlight as this can interfere.
    3. Ensure that the two remotes are approximately 2 to 3 cm apart, and that the transmitting end of the original remote is facing the remote. Sometimes holding the key on the original remote down for slightly longer may help, and conversely sometimes quickly pressing and releasing the key on the original works better.
    4. The batteries used should have sufficient power. Even though the remote works when using it to switch on and off devices, it might not have enough power to be able to learn additional functions. Please replace a new set of batteries
    5. It is also possible that the memory on your remote control has reached the maximum capacity due to too many learned or other customized functions. Please remove some existing learned keys, or perform a factory reset to completely wipe the remote’s memory. Click here to see the factory reset procedure for information.
    6. Some manufacturer’s remotes use a different signal, or infra-red protocol, that the One For All remote cannot reproduce. These are commonly signals that use a higher frequency. Radio frequency remotes cannot be learned from, because these signals are not infra-red based.

    Read more
  • How can I learn a missing function on my Samsung TV Replacement Remote using the original remote control? Your One For All remote is capable of copying functions straight from the original remote control that came with your device.
    To use the Learning feature, please follow the instructions below:
    1. Hold down B (GREEN) and C (YELLOW) until the LED blinks twice.
    2. Enter 975, the LED light will blink twice.
    3. Press the key on the Samsung Replacement remote where you would like to place the learned function, the LED will flash rapidly.
    4. Press and hold the key on the original remote control that you wish to learn until the LED on the replacement remote blinks twice.
    5. Repeat the above two steps by pressing any other key you wish to learn on.
    6. Press and hold the OK key to store the learned function until the LED blinks twice.

    Additional information:

    • It is possible to learn up to 50 functions on this remote
    • A time-out will occur if no signal is received from the original remote within 5 seconds. To retry, press the key to be learned on again.
    • One long blink indicates the remote did not capture the signal correctly.
    • Two long blinks indicate the memory is full.

    If learning didn’t work, please click here for more information.

    Read more
  • How can I delete a learned key on my Samsung TV Replacement Remote? If you would like to delete a learned function that you no longer require, please follow the procedure outlined below:
    1. Hold down B (GREEN) + C (YELLOW) keys (the LED will blink twice)
    2. Press 976 (the LED will blink twice)
    3. Press twice the Key to reset on the Samsung remote (LED will blink twice)

    Additional Information:

    • You can delete a learned key by overwriting it with a new learned function.
    • If a learned function used in a macro is subsequently deleted, the macro will revert to sending the keys original function.
    Read more
  • When trying to learn a key, the Samsung TV Replacement Remote gives one long blink. What does this mean A long blink indicates that the Samsung TV Replacement Remote failed to learn the signal from the original remote. There could be a number of reasons for this.
    1. Make sure the original remote that came with the device is in working order, by testing it on your device. If it is not responding, it might not be working correctly.
    2. Make sure you are not performing the learning procedure under bright lighting or in bright sunlight as this can interfere.
    3. Ensure that the two remotes are approximately 2 to 3 cm apart, and that the transmitting end of the original remote is facing the remote. Sometimes holding the key on the original remote down for slightly longer may help, and conversely sometimes quickly pressing and releasing the key on the original works better.
    4. The batteries used should have sufficient power. Even though the remote works when using it to switch on and off devices, it might not have enough power to be able to learn additional functions. Please replace a new set of batteries
    5. It is also possible that the memory on your remote control has reached the maximum capacity due to too many learned or other customized functions. Please remove some existing learned keys, or perform a factory reset to completely wipe the remote’s memory. Click here to see the factory reset procedure for information.
    6. Some manufacturer’s remotes use a different signal, or infra-red protocol, that the One For All remote cannot reproduce. These are commonly signals that use a higher frequency. Radio frequency remotes cannot be learned from, because these signals are not infra-red based.
    Read more
  • I can operate most functions of my Samsung Replacement Remote, but some important keys aren't working. How can I resolve this?

    If not all buttons are mapped correctly, this could mean the current setup you're using isn't optimized for the Samsung TV model you have. Please follow the instructions in the manual for a "Second Tier Search" and hold down the key that isn't working during this search.

    Read more
  • I noticed there are some buttons on the Samsung Replacement Remote that I didn't have on my original. Can I use these as well?

    Generally, the Samsung Replacement remote can only perform the exact same functions as the original remote. This means that no new features will be added to your TV, and the keys will most likely have no function.

    You can, however, use these keys for learning purposes.

    Read more
  • Will the Samsung Replacement Remote work with other TV brands or other devices?

    No. The Samsung Replacement Remote has been specifically  designed to work with Samsung televisions only.

    Read more
  • How do I perform a factory reset on my Samsung Replacement Remote? Before resetting the Samsung replacement remote, please take the following into account:
    If you have ever sent in your remote control to our Upgrade Service for an update, these codes will be erased as well.
    In that case, it is highly advised not to perform a factory reset.

    To reset your remote to the manufacturer's setting please use the following procedure:
    1. Hold down B (GREEN) + C (YELLOW) keys, the LED will blink twice.
    2. Enter code 981, the LED will blink four times in total.

    You can now setup your remote again.

    Read more
  • When trying to learn a key, the TD System Replacement Remote gives one long blink. What does this mean?

    .

    Read more
Contact Customer Support