URC7960, URC7962, URC7965: How do I program my code on my Smart Control ?

To program the basic code on your Smart Control, please follow the instructions mentioned below:

1. Hold down MAGIC until the ring blinks twice.
2. Press the left or right arrow key to select the device key.
3. Enter the code, the ring will blink twice.
4. You can now operate your device.

If the LED does not blink twice at the end, please try the following:

1. Hold the magic key down until the ring blinks twice.
2. Enter 992, the ring will blink twice.
3. Press the left or right arrow key to select the device key.
4. Press the Magic key once, the ring blinks once.
5. Press the Magic key again, the ring will blink twice.
6. You can now set up the device code.