URC1635: How can I learn a missing function on my SKY Q Replacement Remote using the original remote control?

Your One For All remote is capable of copying functions straight from the original remote control that came with your device.

To use the Learning feature, please follow the instructions below:

1. Hold down the number 1 and 3 keys until the light blinks once and then twice.
2. Press and release the key on the One For All where you would like to place the learned function, the LED will blink continuously
3. Press and hold the key on the original remote control that you wish to learn , for example Power
4. The red LED blinks twice.
5. Repeat step 2 and 3 for each key you want to learn. Please note you can learn from multiple remotes, but only one function per key.

Additional information:

1. It is possible to learn up to 50 functions on this remote
2. A time-out will occur if no signal is received from the original remote within 5 seconds. To retry, press the key to be learned on again.
3. One long blink indicates the remote did not capture the signal correctly.
4. Two long blinks indicate the memory is full.

Related articles:
URC1635: How can I learn a missing function on my SKY Q Replacement Remote using the original remote control?
Universal Remotes: Why doesn’t the learning work on my universal remote?
URC1635: How can I delete a learned key on my SKY Q Replacement Remote?