URC7120, URC7130, URC7140: How can I program a missing function on my Essence remote?

It is possible to program a missing function via the Key Magic procedure.

If you provide the relevant information via this web form we will supply a 5 digit code to be programmed for each missing function and the programming procedure.


To use the Key Magic procedure, please follow the instructions outlined below:
  1. Hold down the MAGIC key until the light blinks once and then twice and stays lit.
  2. Use the MODE key to select the relevant device key.
  3. Enter the code 994, the light blinks twice.
  4. Press the Magic key once
  5. Enter the code of the required function, see below.
  6. Press the One For All key you wish to assign the function to.
  7. The light blinks twice and that key should now function.

Please note:

  • The MODE key, CombiControl key and Magic key cannot be programmed.
  • The functions listed here might not all be compatible with your specific make and model. Programming a function that does not exist on the original remote control might cause malfunction or damage for which One For All cannot be held responsible.