URC1240, URC1280: How do I associate the volume keys to one particular device on the Contour remote?

It is possible to lock the volume on your Contour to a single device key (for example: the volume control could be linked only to a TV). This means that when the remote is in DVD or SAT mode and the volume keys are pressed, the TV volume will still be activated.

If you would like to have the volume locked to a particular device, please follow the procedure outlined below:
  1. Press and hold down the SETUP key until the red LED underneath the POWER key blinks twice (the red LED will blink once then twice).
  2. Enter code 9 9 3, the light will blink twice.
  3. Press the relevant device you wish to assign volume control to (for example TV).

How to deactivate Volume Control:

  1. Select the device key you wish to deactivate from Volume Control (e.g. AMP).
  2. Press and hold down the SETUP key until the red LED underneath the POWER key blinks twice (the red LED will blink once then twice).
  3. Press 9 9 3.
  4. Press the VOL(+) key and the red LED will blink four times.