URC7880: How can I learn a missing function on my Smart Control using the original remote control?

Your One For All remote is capable of copying functions straight from the original remote control that came with your device.

To use the Learning feature, please follow the instructions below:

  1. Hold down MAGIC until the LED under the device blinks twice. The LED under the current mode key will stay lit.
  2. Use the DEVICES key to select the relevant device mode.
  3. Enter code 975, the light will blink twice.
  4. Press the key on the One For All where you would like to place the learned function - The Watch TV, Listen To Music and Custom LEDs will light up.
  5. Press the key on the original remote control that you wish to learn until the light on the One For All blinks twice.
  6. Press and hold the MAGIC key to store the learned function until the light blinks twice.

Additional Information:

  • It is possible to learn up to 400 functions on this remote.
  • If you wish to learn more functions within the same mode, simply repeat steps 4 and 5. If you would like to continue learning but in a different device mode please repeat from step 3 until 5. When you have finished learning all of the required functions, press and hold MAGIC to store.
  • It is possible to learn onto an empty device mode. The functions from this learned only device mode can also be used in Macros and Volume lock.
  • One long blink indicates the remote did not capture the signal correctly.
  • Two long blinks indicate the memory is full.