This site uses cookies. By continuing to browse this site you are agreeing to our use of cookies. Find out more here.

WirelessTV Sender

SV 1730

Where to buy?

Maximise your digital TV experience

Wireless and interference free distribution of recordings, pay-tv, video and audio signal through walls and ceilings to your second TV in another room

Share your channels

Share your channels

Share your pay TV channels and recordings with your second TV set, up to 100 meters

Interference free

Interference free

Clear picture and sound quality via “Zero interference” Technology (5.8Ghz)

Additional Information

Product code SV 1730
Digital TV
STB (Satellite / Cable / Terrestrial)
Blu-Ray / DVD
Interference free technology
RCA connectors
Scart Cable included
Video signal input Composite (CVBS) / S-Video
Video signal output Composite (CVBS) / S-Video
Frequency 5.8 GHz
Channels 4
Range clear line of sight up to 100 meters
Antenna External Patch Type
Frequency_IR 433.92 MHz
Remote signals (IR) 30 kHz - 60 kHz
Antenna (IR) Internal
AC/DC adaptor 9V DC/250 mA
3.5 mm - SCART
Remote Control Extender
Smart TV accessoires

FAQs & Solutions

  • With which kind of devices is the Wireless 5.8 Ghz TV Sender compatible? It is compatible with Digital Set-top boxes (Satellite/Cable/Terrestrial), DVD & Blu-Ray player, Camcorder, VCR and other AV Devices. PLEASE NOTE: The Wireless 5.8 Ghz TV Sender is not totally comaptible with some HD+ Boxes as Sky+HD and Canal+: PlusLeCube and Tivo boxes.
    Read more
  • I cannot get a picture on my second TV. Make sure that the TRANSMITTER and RECEIVER are switched ON and that both are set to the same channel.
    Aim the flat antenna's in this way, that they point to each other.   
    Do not leave them flat on the transmitter and/or reiceiver

    Select EXT or AV on second TV. Make sure that all cables are connected correctly.
    Check that the video source (satellite receiver, video recorder, camcorder, DVD player, digital or analogue Set-Top Box or Pay-TV decoder box) is switched on and to use the correct SCART connector (e.g. EXT1 or EXT2) of the video source (check manual of video source). Read more
  • I cannot connect my source device to the TV as I have just one scart output on the source. You will need to buy a splitter in order to connect the devices.
    Read more
  • Using a remote control, I cannot control the video source from the second TV. Aim the remote control directly at the RECEIVER unit and ensure that there are no obstacles in between. Ensure that there is no other wireless device (wireless headphones, speakers, RF control signals) interfering with the remote control. Make sure that TRANSMITTER and RECEIVER are more than 16 ft (5 m) apart.

    Make sure to use the remote control of the video source.

    Reposition the IR Eye on the video source OR place the IR Eye 2 - 4 inch (5 - 10 cm) in front of the video source. Read more
Contact Customer Support


  • Instructional video
    Instructional video