Maximise your digital TV experience
Wireless and interference free distribution of recordings, pay-tv, video and audio signal through walls and ceilings to your second TV in another room
Share your channels
Share your pay TV channels and recordings with your second TV set, up to 100 meters
Clear picture and sound quality via “Zero interference” Technology (5.8Ghz)
|Product code||SV 1730|
|STB (Satellite / Cable / Terrestrial)||✓|
|Blu-Ray / DVD||✓|
|PVR / DVR||✓|
|Interference free technology||✓|
|Scart Cable included||✓|
|Video signal input||Composite (CVBS) / S-Video|
|Video signal output||Composite (CVBS) / S-Video|
|Range clear line of sight||up to 100 meters|
|Antenna||External Patch Type|
|Remote signals (IR)||30 kHz - 60 kHz|
|AC/DC adaptor||12V DC/250 mA|
|3.5 mm - SCART||✓|
|Remote Control Extender||✓|
|Smart TV accessoires||✓|
With which kind of devices is compatible?
For Digital Set-top boxes (Satellite/Cable/Terrestrial), DVD & Blu-Ray player, Camcorder, VCR and other AV Devices. PLEASE NOTE: The SV 1730 is not totally comaptible with some HD+ Boxes as Sky+HD and Canal+: PlusLeCube and Tivo boxes.
I cannot get picture on my second TV.
Make sure that the TRANSMITTER and RECEIVER are switched ON.
end that both are set to the same channel.
Select EXT or AV on second TV. Make sure that all cables are connected correctly.
Check that the video source (satellite receiver, video recorder, camcorder, DVD player, digital or analogue Set-Top Box or Pay-TV decoder box) is switched on and to use the correct SCART connector (e.g. EXT1 or EXT2) of the video source (check manual of video source).
Using a remote control, I cannot control the video source from your second TV.
Aim the remote control directly at the RECEIVER unit and ensure that there are no obstacles in between. Ensure that there is no other wireless device (wireless headphones, speakers, RF control signals) interfering with the remote control. Make sure that TRANSMITTER and RECEIVER are more than 16 ft (5 m) apart and that you are using the remote control of the video source. Reposition the IR Eye on the video source OR place the IR Eye 2 - 4 inch (5 - 10 cm) in front of the video source.
I can not connect my source device to the TV as I have just one scart output on the source.
You will need to by a splitter in order to connect the devices.