Smart Control Motion

URC 7962

Works up to 6 devices (TV, Satellite, DVD, Amplifier, Mp3, Game console and others)

Control your devices by simply moving the remote 

For example, a short flick to the right to fast forward your recordings or jump to the next channel, song or scene. The remote is pre-programmed with 5 gestures that activate the most commonly used functions, such as channel up and down, next or previous scene, play or pause, sound mute, and all power off. Especially for people who like to personalize, these gestures can be re-programmed to any command you want it to operate.

MotionControl

MotionControl

Control your devices by simply moving the universal remote. For example, a short flick to the right to fast forward your recordings or jump to the next channel, song or scene

SmartControl

SmartControl

The integrated SmartControl® provides you complete ease of use. They automatically combine the keys of different devices you want to control at the same time. This allows you to control multiple devices with just one button press. For example: pressing “WATCH MOVIE” controls your TV, DVD and amplifier.

30 Seconds To Set Up Your Remote

Just 3 steps to set-up your device. Set-up your brand in under 30 seconds: Press the Magic button Select the device you wish to set up Press a digit key to setup your respective brand.

No 1  


     Why buy One For All

  • The world leader in remote controls
  • Selling 200 Million remotes a year
  • Over 25 years experience in wireless technology

    The One For All devices code database is the largest and most comprehensive in the world. You have access to over 300.000 models, covering more than 6.000 brands. The database is 100% based on orginal manufactured data and therefore guarantees 100% support of all functions. One For All universal remote controls guaranteed to work all brands.

Additional Information

Product code URC 7962
Learnable / copy any function of your original remote control
MotionControl
Macro
Teletext / fasttext
Controls multiple devices types at the same time
Service upgradable
30 seconds to setup your remote
Device mode indicator
Backlight
Batteries 4 x AAA (not incl.)
Display N/A
Internet Upgradable N/A
Operation System support N/A
No. of devices 6
TV/LCD/LED/Plasma
Satellite/Cable/DVB-T/IPTV receiver
Freeview / TNT / TDT / DTT
DVD/Blu-ray player
Amplifier/Tuner/Home Cinema/Soundbar/Hi-Fi
iPod/iPhone/iPad/ MP3/MP4 docking station
Media center/media player/Home Theatre PC/Game console

FAQs

  • Where can I find the right code for my device, to install onto my One For All remote?

    Click here to do directly to the "Find your Setup Code" tool. Here, you can find the right code, and you'll also find the right programming procedure.

  • How can I set up a device if I don't have/know the code?

    Click here to do directly to the "Find your Setup Code" tool. Here, you can find the right code, and you'll also find the right programming procedure.

  • How can I program a missing function onto my One For All remote?

    You can use the learning function of the Smart Control 7962, by following the instructions in the manual, which can be found in the manual tab above.

  • Why doesn't the learning work?

    A long blink indicates that the xxxx failed to learn the signal from the original remote. There could be a number of reasons for this.

    Firstly, check the original remote is working correctly.
    Next, make sure you are not performing the learning procedure under bright lighting or in bright sunlight as this can interfere.
    Also ensure that the two remotes are approximately 2 to 3 cm apart, and that the transmitting end of the original remote is facing the remote. Sometimes holding the key on the original remote down for slightly longer may help, and conversely sometimes quickly pressing and releasing the key on the original works better.

    Finally if the batteries in your remote are low, this could cause the unit to exit the programming mode. Try with some new batteries if available.

  • How do I delete a learned function?

    If you would like to delete a learned function on your Smart Control 7962 that you no longer require, please read the delete learning section in the manual, which can be found in the manual tab above.

  • Which device key on the One for All do I use for DVD-Home Cinema?

    On the Smart Control 7962, you can use the DVD and audio key for your DVD-Home Cinema. After programming the set-up code please test the volume keys. Also please check if the 1-0 keys change the inputs and if play and stop work correctly with the DVD-Home Cinema. 

  • How can I tune in my TV channels?

    The Smart Control 7962 does not have its own way of tuning in the channels. This depends entirely on how the tuning was done with the original remote. You should find instructions on how to do the tuning in your TV user manual.

    If you no longer have the user manual, nor the original remote, and you do not know exactly how the tuning was done, please contact the TV manufacturer for assistance. Quote your TV model number and either ask them to replace the manual, or ask them to tell you, step by step, how you would tune the TV stations when using the original remote control.

    If you require special functions for tuning the channels, you can contact our Customer Support Team by clicking the link below. We will need to know how these keys were labeled (i.e., name, symbol, color, etc…) on the original TV remote control.

  • What device key do I use for Freeview?

    The SAT key should be used for programming the Freeview.

  • Does the One for All operate my Sky+ or SkyHD receiver?

    Yes, the Smart Control 7962 operates all brands including this one. The basic code for most mainstream Sky+ receivers is Satellite code 1175. For SkyHD, this is Satellite code 1662.

    You can also use the "Find your setup code" tab above to find the right code for your Smart Control 7962 and enter the exact make and model number of your Sky receiver.



Click here to send us a support e-mail

Videos

  • Control your devices by simply moving the remote
    Control your devices by simply moving the remote

Reviews



ExpertReviews.co.uk

Universal remote controls don’t have to cost a fortune, as this One for All Smartcontrol Motion remote proves. It costs a very reasonable £27 but can be programmed to control six different devices, and even has some motion-sensitive functions thrown in for good measure...Read More