Experience full control of digital TV
The Essence 4 is the ideal universal remote to control all your equipment without switching between device modes. You can now Control your TV and set-top- box as if they were one. No more switching between different remotes. The Essence 4 operates TV, LCD, Plasma, SAT/CABLE/ DVB-T, Freeview, DVD, Blu Ray, Amplifier, Audio, Home Cinema, up to 4 devices.
Ultra Wide Angle
An integrated 160 degree infrared lens makes it possible to operate all Essence universal remotes at just about any angle.
Control your TV and set-top- box as if they were one. The automatically installed CombiControl button allows you to control the TV volume and your set-top-box channels without having to switch the One For All® remote’s control mode, let alone switch between two different remotes.
30 Seconds To Set Up Your Remote
Just 3 steps to set-up your device. Set-up your brand in under 30 seconds: Press the Magic button Select the device you wish to set up Press a digit key to setup your respective brand.
|Product code||URC 7140|
|Learnable / copy any function of your original remote control||✓|
|Teletext / fasttext||✓|
|Controls multiple devices types at the same time||✓|
|30 seconds to setup your remote||✓|
|Device mode indicator||✓|
|Batteries||4 x AAA (not incl.)|
|Operation System support||N/A|
|No. of devices||4|
|Freeview / TNT / TDT / DTT||✓|
|iPod/iPhone/iPad/ MP3/MP4 docking station||✓|
|Media center/media player/Home Theatre PC/Game console||✓|
How can I program a missing function onto my One For All remote?
You can use the learning function of the Essence 7140, by following the instructions in the manual, which can be found in the manual tab above.
How can I set up a device if I don't have/know the code?
You can use the learning function of the remote, by following the instructions in the manual, which can be found in the manual tab above.
Why doesn't the learning work?
A long blink indicates that the Essence 7140 failed to learn the signal from the original remote. There could be a number of reasons for this.
Firstly, check the original remote is working correctly.
Next, make sure you are not performing the learning procedure under bright lighting or in bright sunlight as this can interfere.
Also ensure that the two remotes are approximately 2 to 3 cm apart, and that the transmitting end of the original remote is facing the remote. Sometimes holding the key on the original remote down for slightly longer may help, and conversely sometimes quickly pressing and releasing the key on the original works better.
Finally if the batteries in your remote are low, this could cause the unit to exit the programming mode. Try with some new batteries if available.
How do I delete a learned function?
If you would like to delete a learned function on your Essence 7140 that you no longer require, please read the delete learning section in the manual, which can be found in the manual tab above.
Does the One for All operate my Sky+ or SkyHD receiver?
Yes, the Essence 7140 operates all brands including this one. The basic code for most mainstream Sky+ receivers is Satellite code 1175. For SkyHD, this is Satellite code 1662.
You can also use the "Find your setup code" tab above to find the right code for your Essence 7140 and enter the exact make and model number of your Sky receiver.
What device key do I use for Freeview?
On the Essence 7140, the SAT key should be used for programming the Freeview.
Which device key on the One for All do I use for DVD-Home Cinema?
Please use the DVD or AMP key on the remote, depending on the device code type. After programming the set-up code please test the volume keys. Also please check if the 1-0 keys change the inputs and if play and stop work correctly with the DVD. Should you require further information or assistance, please use our email support by clicking on the link below.
How can I tune in my channels?
The Essence 7140 does not have its own way of tuning in the channels. This depends entirely on how the tuning was done with the original remote. You should find instructions on how to do the tuning in your TV user manual.
If you no longer have the user manual, nor the original remote, and you do not know exactly how the tuning was done, please contact the TV manufacturer for assistance. Quote your TV model number and either ask them to replace the manual, or ask them to tell you, step by step, how you would tune the TV stations when using the original remote control.
If you require special functions for tuning the channels, you can contact our Customer Support Team by clicking the link below. We will need to know how these keys were labelled (i.e., name, symbol, colour, etc…) on the original TV remote control.
How do I program my code?
Please use our "Find your Setup Code" tool. Here, you can find the right code, and you'll also find the right programming procedure for your remote control.
Where can I find the right code for my device, to install onto my One For All remote?
Please use our "Find your Setup Code" tool. Here, you can find the right code, and you'll also find the right programming procedure for your remote control
Also known as the Essence 4, the One For All URC-7140 4-in-1 universal remote may come in at under £20 but offers copious ways of setting up macro and micro commands to suit your needs...Read More